Machinist: Selected Titles - DVDs

Call #: TJ 1225 M555 2009
90 min.
Deals with the functions, characteristics, and basic operations of the milling machine.

TJ 1160 E54 2009
60 min.
Covers setups and operations, thread chasing, 4-jaw chuck, faceplate, follower rest, and steady rest.

TJ 1313 I57 2009
40 min.
Explains and demonstrates how to use and interpret readings of the precision tools of the trade.

TJ 1225 M5555 2010
14 DVDs; 177 min. total
1. Identification of parts and operation of a vertical milling machine -- 2. Cutters and machining on the vertical milling machine -- 3. Use of dividing head and rotary table -- 4. Machining keyways on the vertical milling machine -- 5. Use of plain and side milling cutters on the horizontal milling machine -- 6. Identification of parts and operations of a horizontal milling machine -- 7. Set-ups for holding work to be milled -- 8. Use of the face milling cutter on the horizontal mill -- 9. Sharpening the periphery of an end mill -- 10. Sharpening ends of end mills -- 11. Gouging of end mills -- 12. Sharpening a reamer between centers -- 13. Sharpening the periphery of plain milling cutters and side mills -- 14. Sharpening brazed carbide lathe tools using a universal vise.

TJ 1160 B385 2010
10 DVD set; 116 min. total
Safety procedures & guidelines -- Hand tools and their uses -- Use of measuring tools -- Vertical milling machine: parts & operation -- Vernier caliper and protractor -- Pedestal grinder: safety procedures and use preparation -- Sharpening drill bits by hand & machine -- Drill presses: sensitive & radial arm -- Drill presses: operations -- Vertical band machine or band saw: parts and accessories, butt-welding blades, saw set-up.

TJ 1218 B375 2010
14 DVD set; 300 min. total
Identification of parts and core -- Accessories -- Speed & feed -- Grinding a right-hand roughing tool -- Grinding a round nose finishing tool -- Mounting and truing work in the 4-jaw, independent chuck -- Three methods of facing work to length -- Straight turning work of two diameters -- Straight turning between centers -- Drilling, boring and reaming work -- Turning a radius -- Turning tapers -- Filing & polishing -- Knurling on the lathe.

TJ 1218 I58 2010
14 DVDs; 186 min. total
1. Grinding forming tools & machining forms -- 2. Machining shoulders and corners on the lathe -- 3. The cut-off tool -- 4. Measuring external and internal threads -- 5. Tap and die threading on the lathe -- 6. Chasing external threads and finishing with a die -- 7. Roughing & finishing external threads on the lathe -- 8. Cutting internal threads -- 9. Cutting acme threads -- 10. Chasing tapered pipe threads on the lathe -- 11. Machining offset holes-face plate and four jaw chuck -- 12. Using the tool post grinder -- 13. Using the steady rest & follower rest on the lathe -- 14. Spring winding on the lathe.